LID LENGTH:
The Lid Length is the measurement of the total length of the lid.
OVERHANG:
The Overhang is the measurement
of the end of the lid to the outside of the screen.
SCREEN HEIGHT:
The Screen Height is the measurement
from the very top of the screen to the bottom of the screen.

 

 

 

EFFECTIVE HEIGHT:
The Effective Height is the measurement
from the top "visible" portion of the screen
(not including the screen hidden under the overhang of the lid)
to the bottom of the screen.

 

THE BASIC SWEEP KIT:
Professional Duty
Chimney Cleaning Equipment

This is the same quality that professional sweeps use. Anything you find in a big box store is inferior.

The Basic Sweep Kit includes the following:
  • (5) 4' Sweeping Rods - Extra Rods Available
  • (1) Flue Brush of Your Choice
  • (1) 16" Smoke Shelf Brush
  • (1) Scratch & Scrape Wire Brush
ACTUAL HOLE SIZE:
Measure across the hole in several areas to determine an average hole size.
Clay pots generally do not have a perfectly round hole.
INSIDE SCREEN TO SCREEN LENGTH:
The Inside Screen To Screen Length is the measurement
from one end of the screen to the other end of the screen.
MOUNTING FLANGE:
The Mounting Flange is the portion
which extends from the base of the screen, providing a means for attaching to chimney crown.

 

 

 

TOTAL FLANGE LENGTH:
The Total Flange Length is the total length of the base.

LID WIDTH:
The Lid Width is the measurement of the total width of the lid.
TOTAL HEIGHT:
The Total Height is the overall measurement from the top of the lid to the base.
INSIDE SCREEN TO SCREEN WIDTH:
The Inside Screen To Screen Width is the measurement
from one end of the screen to the other end of the screen.
TOTAL FLANGE WIDTH:
The Total Flange Width is the total width of the base.
HORIZONTAL SKIRT:
The Horizontal Skirt is the portion
of the base which extends out "horizontally" from the base of the screen.

 

 

VERTICAL SKIRT:
The Vertical Skirt is the portion
of the base which extends down "vertically" from the base of the screen.

 

 

RIDGELINE:
The Ridgeline is a measurement of the 'ridge' of the cap.
LID LENGTH:
The Lid Length is the measurement of the total length of the lid.
OVERHANG:
The Overhang is the measurement
of the end of the lid to the outside of the screen.
SCREEN HEIGHT:
The Screen Height is the measurement
from the very top of the screen to the bottom of the screen.

 

 

 

 

EFFECTIVE HEIGHT:
The Effective Height is the measurement
from the top "visible" portion of the screen
(not including the screen hidden under the overhang of the lid)
to the bottom of the screen.

 

 

 

INSIDE SCREEN TO SCREEN LENGTH:
The Inside Screen To Screen Length is the measurement
from one end of the screen to the other end of the screen.
LID WIDTH:
The Lid Width is the measurement of the total width of the lid.
TOTAL HEIGHT:
The Total Height is the overall measurement from the top of the lid to the base.
INSIDE SCREEN TO SCREEN WIDTH:
The Inside Screen To Screen Width is the measurement
from one end of the screen to the other end of the screen.
TOTAL FLANGE WIDTH:
The Total Flange Width is the total width of the base.
MEASURING FOR YOUR CAP BASE:
There are two measurements that need to be determined to achieve a good fit on the chimney.

The first is the minimum measurement that will cover the flue(s). Essentially, you want to determine the smallest "box" which would surround all flues on top of the chimney, while being centered squarely. We need the length and width of that "box"

The second measurement is the outermost dimensions of the chimney crown, less three inches. The three inches subtracted will account for a 1.5" mounting flange which is on all four sides of the cap's outer edge.

In theory, any measurement between the minimum, and the maximum should work. Chimney crowns, however, are not always consistent in their shape and bevel. To ensure that you have a good fit, you may have to find the flattest area of the crown on the outside of your minimum measurement, and measure the largest are which appears to give a sound mounting area. The mounting flanges are bendable with gloved hands or pliers to accommodate unevenness on the crown, but there are limits. Alternatively, you can resurface the crown with a concrete patching material, or a sand mix cement product, to level out the crown.
MEASURING FOR SCREEN HEIGHT:
Determining the screen height of your new cap is critical to the performance of your chimney. The chimney sweep standard for chimney caps has been to have the screen 6" above the tallest flue. This is a tried and proven method.
DETERMINING OVERHANG:
The lid overhang accomplishes two things. First, it protects the area below from inclement weather. Secondly, it alters the visual impact that the chimney cap has on the overall appearance on the house. An overhang that, at a minimum, is equivalent to the dimensions of the chimney top will "blend in" with the chimney, making it appear as a planned improvement instead of an afterthought.
LID PITCH/ANGLE:

 

DRIP EDGE:
Adding a drip edge will discourage water from dripping off the skirt onto the chimney casing.
SCREEN OPTION:
In some municipalities, the local fire codes require 5/8" mesh due to it's better ability to contain sparks.

3/4" mesh is recommended elsewhere to minimize flow restriction, and condensate accumulation.

By selecting your state, we will select the screen option which is best for your area.
ADD CORNER REINFORCEMENTS:
Corner reinforcements are standard on copper caps, and optional on stainless steel caps. Although they are not structurally required on stainless steel caps, they do offer a pleasing architectural detail.
REVERSED MOUNTING FLANGES:
Reversed mounting flanges allow the screen to be positioned closer to the edge of the chimney, providing a distinctive appearance. This may slightly increase the difficulty in mounting the cap, because the lid must be removed to predrill and install the Tapcon fasteners.
POWDER COAT:
Some customers prefer their chimney caps powder coated to complement their home in either Satin Black, or Brown. This high quality powder coating finish is professionally baked on for years of service.
METAL TYPE

STAINLESS STEEL: The professional's choice for its permanently clean appearance, anti-corrosion properties, and lifetime warranty. No rusting!

COPPER: For the classy look of a semi-precious metal, copper also offers a lifetime warranty. Copper will ultimately patina to a dark brown or green, depending on environment.

PAINT GRIP GALVANIZED STEEL: This material is well suited for powder coating to match or contrast other home accents.

G-90 GALVANIZED STEEL: This is the most affordable material, and will rust the soonest. Most original equipment chase covers are made with this material, due to its affordability.
CHASE COVER MEASUREMENTS:

Measure all four sides of the top of the uncovered chimney chase, right at the edge, to the nearest 1/8th inch. Although the chimney may appear to have identical measurements, that is rarely the case. Give us the longest width, and the longest length. This will be the TO FIT measurement. We will increase the measurements you gave us by approximately 3/8th inches to ensure that the chase cover fits over the chimney.

If the measurements are taken from a previously installed chase cover, measure the outside of the chase cover on all four sides. Give us the longest width, and the longest length. This will be the FINISHED SIZE. We will build the chase cover to these measurements.

All chase covers are built to the measurements which you provide. There are no returns on chase covers or other custom made parts, so measure carefully!
OVERALL SIZE

Finished Size: Measurements based on the existing chase cover dimensions.

To Fit Size: Measurements based on the existing bare chase dimensions.
VERTICAL (SIDE) SKIRT:
Skirt Length should be long enough to cover any exposed wood, or the majority of the first course of brick, and allow the fasteners to securely anchor the skirt into the chase. 3" is standard
DRIP EDGE
The drip edge is a no cost option which flares the bottom 1/2" of the side skirt out to prevent water from dripping directly onto the siding or brick below.
POWDER COAT
Powder coating in black or brown offers a durable finish for your chase cover. Best adhesion is achieved with Paint Grip Galvanized Steel, but Stainless Steel can be powder coated as well.
HOW MANY HOLES
Select the number of holes to correspond with the number of pipes in your chimney.
HOLE SIZE:
Add a minimum of 1/4" to the dimension of the pipe. This will allow the pipe to fit with ease through the hole.
HOLE IN CENTER
Select whether the hole is in the center or not.
HOLE MEASUREMENTS:
For a Non-centered hole: Measurements to the edge of the hole, not the edge of the pipe. (See Hole Size above before measuring). Hole diameter plus both flanking measurements must equal overall length or width, as applicable.
COLLAR HEIGHT
The chase cover collar prevents water from running into the hole. 2" is standard, and generally sufficient.
STORM COLLAR:
This part prevents water from running between the pipe and the chase cover collar. This is a separate, optional part, and the use of a storm collar is strongly encouraged.

If you are replacing a chase cover, you may also need a new storm collar. Give us the outside diameter of your metal chimney and we will make them to fit. 3" wide is standard.
PIPE O.D. SIZE
This should be at least 1/4" smaller than the hole size.
METALLIC BLACK PAINT:
Item #: AC05959
AC05959 Select this option if you would like Metallic Black Aerosal Paint-342G included.
SILICONE/DOOR GASKET KIT:
Item #: AC06500
AC06500 This is the Silicone and Door Gasket Replacement Kit (8 ft. - Black).
GLASS GASKET KIT:
Item #: AC06400
AC06400 This is the Self-Adhesive Glass Gasket Replacement Kit (6 ft. - Black).
HIGH-DENSITY FIREBRICKS:
Item #: AC03030
This is High-Density Firebricks 4" x 8" x 1 1/4" Price Per Pack (Packs of 9).
HIGH-DENSITY FIREBRICKS:
Item #: AC03020
This is High-Density Firebricks 4 1/2" x 9" x 1 1/4" Price Per Pack (Packs of 9).
100 CFM BLOWER:
Item #: AC05520
AC05520 This is the 100 CFM Blower With Variable Speed Control.
130 CFM BLOWER:
Item #: AC03095
AC03095 This is the 130 CFM Blower With Variable Speed Control.
FRESH AIR KIT:
Item #: AC01240
AC01240 This is the 3" Fresh Air Kit.
Includes 3" insulated flexible pipe (4-foot length), outside wall termination and two pipe clamps.
THERMODISC KIT:
Item #: AC05530
AC05530 This is the Thermodisc Kit (On/Off).
FRESH AIR KIT ADAPTER:
Item #: AC05050
This is the 3" Fresh Air Kit Adapter.
FRESH AIR KIT:
Item #: AC01239
This is the 4" Fresh Air Kit.
FRESH AIR ADAPTER:
Item #: AC01331
AC01331 1 X Adapter. 2 X Pipe clamps. 1 X Outside wall termination.
ULTRA QUIET BLOWER:
Item #: AC02050
AC02050 This is the Ultra-Quiet Blower with Variable Speed Control.
ADAPTER FOR FRESH AIR:
Item #: AC02080
AC02080 Required for the installation of wood stoves in mobile homes. Also recommended to reduce or eliminate negative pressure problems.
FRESH AIR INTAKE PIPE:
Item #: AC02090
AC02090 Fits with fresh air adapter AC02080. Length of 4 feet, 5" diameter
FRESH AIR KIT ADAPTER:
Item #: AC01298
AC01298 Fresh Air Kit - 5" diameter. Required for the installation of wood stoves in mobile homes. Also recommended to reduce or eliminate negative pressure problems.
FACEPLATE - 29" x 44":
Item #: AC03400
This Faceplate - 29" x 44" is Required.
FACEPLATE TRIM KIT (One Is Required):
Item #: OA10122
This is a Black Faceplate Trim Kit - 29" x 44".

Item #: OA10121
This is a Brass Faceplate Trim Kit - 29" x 44".

Item #: OA10123
This is a Brushed Nickel Faceplate Trim Kit - 29" x 44".
FACEPLATE SIZE (One Is Required):
Item #: AC03410
Faceplate - 29" x 44".

Item #: AC03411
Faceplate - 32" x 50".
FACEPLATE SIZE:
Item #: AC03350
Faceplate With Nickel Trim Kit - 29" x 44".

Item #: AC03360
Large Faceplate With Nickel Trim Kit - 32" x 50".
FACEPLATE SIZE:
Item #: AC03370
Faceplate With Nickel Trim Kit - 29" x 44".

Item #: AC03375
Large Faceplate With Nickel Trim Kit - 32" x 50".
FACEPLATE TRIM KIT (One Is Required):
Based on your Faceplate size selection above, please select one of the corresponding options below:

Item #: OA10122
This is a Black Faceplate Trim Kit - 29" x 44".

Item #: OA10121
This is a Brass Faceplate Trim Kit - 29" x 44".

Item #: OA10123
This is a Brushed Nickel Faceplate Trim Kit - 29" x 44".

Item #: OA10128
This is a Black Faceplate Trim Kit - 32" x 50".

Item #: OA10127
This is a Brass Faceplate Trim Kit - 32" x 50".

Item #: OA10129
This is a Brushed Nickel Faceplate Trim Kit - 32" x 50".
LOUVER KIT (One Is Required):
Item #: OA10604
Black Louver Kit.

Item #: OA10605
Gold Plated Louver Kit.

  • Item #: OA10606

  • Brushed Nickel Louver Kit.
    FIREGUARD:
    Item #: AC01308
    This is a Fireguard.
    ADAPTER FOR FRESH AIR KIT:
    Item #: AC03500
    This is the 3" Adapter For Fresh Air Kit.
    HOT AIR GRAVITY KIT:
    Item #: AC01309
    This is the Hot Air Gravity Kit.
    FORCED AIR KIT:
    Item #: AC01340
    This is the Forced Air Kit.
    MAINTENANCE GASKET KIT:
    Item #: AC09198
    This is the Maintenance Gasket Kit.
    MASONRY-LIKE PANELS:
    Item #: AC01276
    AC01276 This is the Decorative Maonsry-Like Panels.
    LOG SET:
    Item #: AC01278
    AC01278 This is the Decorative Log Set.
    SEALING BOX:
    Item #: AC02019
    This is the Sealing Box For the Fresh Air Kit.
    DIGITAL THERMOSTAT:
    Item #: AC05558
    AC05558 This is the Digital Wall Mounted Thermostat (includes 30 ft. Of Millivolt Wire).
    HOPPER EXTENSION:
    Item #: AC01314
    AC01314 Increases the loading capacity of the Eco-45 pellet stove hopper by 80 lbs.
    BASEMENT VENTING KIT:
    Item #: AC02011
    AC02011 This is the 4" Basement Venting Kit. Kit includes 3" - 4" increaser, pipe connector, wall thimble, 2 tees with cap, 2 wall bands, 4 x 24" lengths, 2 x 12" lenghts, 2 x 90° elbows, one 45° elbow, and one termination collar with screen.
    GROUND FLOOR VENTING KIT:
    Item #: AC02013
    AC02013 This is the 3" Ground Floor Venting Kit.
    HOT AIR PLENUM KIT:
    Item #: AC01330
    Hot Air Plenum Kit 4" x 10".
    GROUND FLOOR VENTING KIT:
    Item #: AC02007
    AC02007 This is the 4" Ground Floor Venting Kit. Kit includes : Pipe connector, wall thimble, tee with cap, 2 wall bands, 5 X 12" lengths, 90° elbow, 45° elbow, termination collar with screen.
    THERMOSTATIC REMOTE CONTROL:
    Item #: AC02012
    AC02012 This is the Thermostatic On/Off Remote Control. Fits most brands of gas stoves and fireplaces using a thermostatic millivolt valve. Temperature is displayed in °C or °F.
    THERMOSTATIC REMOTE CONTROL:
    Item #: AC05568
    AC05568 This is the Thermostatic Remote Control. Fits most gas stoves and fireplaces using a thermostatic millivolt valve. All battery operated. Programmable for up to 4 time-periods. Temperature displayed in both °C and °F.
    BLACK STOVE BOARD
    Black Stove Board
    GRAY SLATE TILE STOVE BOARD
    Gray Slate Tile Stove Board
    SANDSTONE TILE STOVE BOARD
    Sandstone Tile Stove Board
    FAN SPEED CONTROL - 5A

    This is the optional Fan Speed Control - 5A
    (Item #: FSC5)

    FAN SPEED CONTROL - 8A

    This is the optional Fan Speed Control - 8A
    (Item #: FSC8)

    STAINLESS CHIMNEY ADAPTER

    This is an optional 8" Stainless Chimney Adapter for RS012 and RS014 Chimney Fans
    (Item #: FR3008A)

    STAINLESS CHIMNEY ADAPTER

    This is an optional 8" Stainless Chimney Adapter for RS009 Chimney Fan
    (Item #: FR2008)

    STAINLESS CHIMNEY ADAPTER

    This is an optional 8" Stainless Chimney Adapter for RS012 and RS014 Chimney Fans
    (Item #: FR3008)

    STAINLESS CHIMNEY ADAPTER

    This is an optional 10" Stainless Chimney Adapter for RS012 and RS014 Chimney Fans
    (Item #: FR3010)

    DRAFT CONTROL

    This is the optional Draft Control
    (Item #: ADC100)

    WIRELESS CONTROL WITH TEMPERATURE SENSOR

    This is the optional EW40 Wireless Control With Temperature Sensor
    (Item #: EW40)

    FREE WITH PURCHASE
    FREE WITH PURCHASE
    LIVE CUSTOMER SUPPORT: Mon-Fri 7:30 AM - 6:00 PM EST | Sat 8:00 AM - 1:00 PM EST Call: 800-819-2731
    Main Menu  | View Cart  |   Login/Register

    Select Product




    Quantity:


    Your Price:






    RELATED PRODUCTS